RSS No Arm 4-Bolt Base Round Straight Steel Pole

RSS - 4-Bolt Base


Click image to enlarge.
To download a printable file, click PDF Download >

Pole
Pole shaft shall be weldable-grade, cold-rolled, commercial quality carbon steel tubing conforming to ASTM A500 Grade B. Options include 11 gauge and 7 gauge. All Welds shall conform to AWS D1.2 using ER70S-6 electrodes.

Base Style
4-Bolt Steel Base Plate of fabricated hot rolled carbon steel conforming to ASTM A36 or equivalent (36 ksi minimum yield) with 2-piece Base Cover and Attaching Hardware. Base Cover will be fabricated from ABS plastic or metal materials.
RSS Base no cover
Base Cover
ABS plastic base covers are standard in all SSS poles specified in BA-Black, BM-Dark Bronze, and BH-White. SSS poles specified in all other colors will be manufactured of metal materials. Metal Base Covers for poles in BA, BM and BH can be specified.

rss base with round cover

Square Metal powder coated base covers are standard in all 11 Gauge RSS poles that are specified in colors other than BA-Black, BM-Dark Bronze, and BH-White AND in all 7 Gauge poles in ALL COLORS. Custom specification of RSS Square Metal style base covers in BA, BM and BH powder coated finishes is available.

rss metal base with square cover

Handhole
3” Butt Diameter –
Reinforced, 2” x 4” Handhole with Cover And Stainless Steel Screws. A Grounding Provision incorporating a tapped 1/2”-13NC hole will be welded to the handhole frame.

4+ Butt Diameters –
Reinforced, 3” x 5” Handhole with Cover, Stainless Steel Screw and Back Bar. A Grounding Provision incorporating a tapped 1/2”-13NC hole will be welded to the handhole frame.

RSS Handhole
Anchorage
Anchorage Kit will include four (4) L-shaped Steel Anchor Bolts conforming to AASHTO M314-90 Grade 55. Ten inches (10”) of threaded end will be galvanized per ASTM A153. Kits will contain eight (8) Hex Nuts, four (4) Lock Washers, and eight (8) Flat Washers (all components Galvanized Steel). A bolt circle template will be provided.

Base and Anchorage Details
Read More >

RSS Anchorage Front
Vibration Damper
If determined necessary by Hapco an internal, factory installed, Second Mode Vibration Damper will be provided. Customer specification of the damper is available.

Vibration Dampers
Read More >

Powder Coat Finish
Coating material will be a thermosetting polyester AAMA 2604 Super Durable powder electrostatically applied, oven cured and bonded in a closed loop, automated system. Minimum thickness of finish will be two (2) mils. Hapco’s Powder Coat Finish Warranty on steel poles is one (1) year.

Finish Options
Read More >

RSS Finish Options RAL swatch

When specifying Pole Accessories, it is important to provide Hapco the correct design orientation. This diagram provides the degree specification and corresponding letter on the pole relative to the pole handhole, and should be used for Drill Mount Options, Electrical Boxes, and Accessories such as Extra Hand Holes and Threaded Couplings.
Design Orientation

RSS Side Drill Mount

Side Drill Mount
For Side Drill Mount applications specify luminaire type, quantity and orientation. A luminaire drilling template must be supplied at time of order.

RSS Welded Tenon Mount

Tenon Mount – Welded
For Tenon Mount applications specify both Tenon diameter (2.375″, 2.875″, 3.5″, 4″, etc.) and length (3″, 4″, 5″, 6″, etc.).

Drill Mount Options

RSS Drill Mount Options

Electrical Box options include Box Only and Boxes with Duplex GFI (WR) Receptacles and Covers. Electrical Boxes are specified with a two-digit notation indicating Height and Orientation (Ex. FA = 30” Up, Side D). Duplex GFI (WR) receptacles with either a Standard Cover (GF1) or In-Use Cover (GF2) can be specified.

RSS Electrical Box

RSS Electrical Box GF1 Open

GF1

RSS Electrical Box GF1 Closed

GF1

RSS Electrical Box GF2 Open

GF2

RSS Electrical Box GF2 Closed

GF2

Couplings
Couplings in  ½” (C12), ¾” (C34) and 1” (C10) sizes may be specified.  Specify height and orientation with order.


Extra Handhole
Standard handholes are provided centered at 1’-6” up from the base of the poles.  Extra Handholes may be specified.  Specify height and orientation with order.

Extra Handhole

Vibration Dampers
First Mode Vibration Dampers can be customer specified.

Vibration Dampers
Read More >

Vibration Damper

Miscellaneous Options
Special options can be customer specified.
LAB – Less Anchor Bolts
LPC – Less Pole Cap
PAB – Pre-shipped Anchor Bolts

Create Custom Specification Drawings

Step-by-step guide generates Steel Pole Specification drawings to match your project requirements.

Click Link to Launch Hapco Steel Designer

Click to Launch Steel Designer