Square aluminum 4-bolt anchor base

4-Bolt Base

Click image to enlarge.
To download a printable file, click PDF Download >

Details

FBC SSA 4-Bolt

Catalog Pages with 2023 FBC Wind Speed Map
PDF Download >

Pole

The pole shaft will be constructed of seamless extruded tube of 6XXX Series Aluminum Alloy per the requirements of ASTM B221. The shaft assembly shall be full-length heat treated after base weld.

Base Style

4-Bolt Cast Aluminum Base Flange of Alloy 356-T6 with Aluminum Snap-In Bolt Covers.

Square aluminum 4-bolt anchor base with 1 cover off

Handhole

4″-5″ Butt Squares – 2″ x 4″ Handhole with square Lap Style Aluminum Door and two (2) Stainless Steel Self-Tapping Attaching Screws. A Grounding Provision incorporating a tapped 1/4″-20NC Grounding Provision is provided opposite the Handhole.
 
6″+ Butt Square – 3″ x 5″ Handhole with square Lap Style Aluminum Door and two (2) Stainless Steel Self-Tapping Attaching Screws. A Grounding Provision incorporating a tapped 1/4″-20NC Grounding Provision is provided opposite the Handhole.
 
 
 
Square aluminum pole hand hole

Anchorage

Anchorage Kit will include four (4) L-shaped Steel Anchor Bolts conforming to AASHTO M314-90 Grade 55. Ten inches (10″) of threaded end will be galvanized per ASTM A153. Kits will contain four (4) Hex Nuts, four (4) Lock Washers, and four (4) Flat Washers (all components Galvanized Steel). A bolt circle template will be provided.

Base and Anchorage Details
Read More >

Cross section of square aluminum 4-bolt anchor base

Vibration Damper

When determined necessary by Hapco, a Vibration Damper will be factory-installed inside the pole shaft. Customer specification of the damper is available.

Vibration Dampers
Read More >

Mounting Designation

Side Drill Mount

For Side Drill Mount applications specify luminaire type, quantity and orientation. A luminaire drilling template must be supplied at time of order.

Drilling pattern for square aluminum pole

Tenon Mount – Welded or Spun

For Tenon Mount applications specify both Tenon diameter (2.375″, 2.875″, 3.5″, etc.) and length (3″, 4″, etc.). Tenon style is factory option. Welded Tenon can be specified.

Satin Aluminum Finish

Pole surface will contain a uniform Brushed Aluminum natural finish. Finish to be achieved utilizing specially formulated abrasives in a multi-pass, rotary sanding operation.

Powder Coat Finish

Coating material will be a thermosetting polyester AAMA 2604 Super Durable powder electrostatically applied, oven cured and bonded in a closed loop, automated system. Minimum thickness of finish will be two (2) mils. Hapco’s Powder Coat Finish Warranty on aluminum poles is five (5) years.

Finish Options
Read More >

Pole Shaft Warranty

Hapco warrants its aluminum pole assemblies for their lifetime to be free of defects in material and workmanship.

Hapco Lifetime Pole Assembly Warranty
Read More >

Create Custom Specification Drawings

Step-by-step guide generates SSA Pole Specification drawings to match your project requirements.

Download Standard Specification Sheets

Pole HeightProduct No.Butt DiaWall ThicknessOld Product No.
8′SSA08B4-4-**4″0.125”11-043
10′SSA10B4-4-**4″0.125”11-063
SSA10D4-4-**4″0.188”11-064
12′SSA12B4-4-**4″0.125”11-083
SSA12D4-4-**4″0.188”11-084
SSA12D5-4-**5″0.188”11-087
14′SSA14B4-4-**4″0.125”11-103
SSA14D4-4-**4″0.188”11-104
SSA14D5-4-**5″0.188”11-107
15′SSA15B4-4-**4″0.125”11-123
SSA15D4-4-**4″0.188”11-124
SSA15D5-4-**5″0.188”11-127
16′SSA16B4-4-**4″0.125”11-143
SSA16D4-4-**4″0.188”11-144
SSA16D5-4-**5″0.188”11-147
18′SSA18B4-4-**4″0.125”11-163
SSA18D4-4-**4″0.188”11-164
SSA18F4-4-**4″0.250”11-165
SSA18D5-4-**5″0.188”11-167
20′SSA20B4-4-**4″0.125”11-183
SSA20D4-4-**4″0.188”11-184
SSA20F4-4-**4″0.250”11-185
SSA20D5-4-**5″0.188”11-187
SSA20F5-4-**5″0.250”11-188
SSA20D6-4-**6″0.188”11-190
SSA20F6-4-**6″0.250”11-191
25′SSA25D5-4-**5″0.188”11-247
SSA25F5-4-**5″0.250”11-248
SSA25D6-4-**6″0.188”11-250
SSA25F6-4-**6″0.250”11-251
SSA25FJ-4-**6.625″0.250”11-254
30′SSA30D6-4-**6″0.188”11-290
SSA30F6-4-**6″0.250”11-291
SSA30FJ-4-**6.625″0.250”11-294
35′SSA35F6-4-**6″0.250”11-331
SSA35FJ-4-**6.625″0.250”11-334