Aluminum round hinged base

Hinged Base

Click image to enlarge.
To download a printable file, click PDF Download >

Details

Florida Building Code (FBC) Catalog Page (Wind Speeds To 180 mph)

FBC RTA Hinged Base

Catalog Pages with 2017 FBC Wind Speed Map

PDF Download >

RTA No Arm Hinged Pole Specifications

Pole

The pole shaft will be constructed of seamless extruded tube of 6063 Aluminum Alloy per the requirements of ASTM B221. The shaft assembly shall be full-length heat treated after base weld to produce a T6 temper.

Base Style

Hinged Cast Aluminum Base Flange of Alloy 356-T6 with 2-Piece Cast Aluminum Base Cover and Stainless Steel Tamper-Resistant Attaching Screws.

Aluminum Round Hinged base tilted

Handhole

4″-5″ Butt Diameters – 2″ x 4″ Handhole with curved Lap Style Aluminum Door and two (2) SS Self-Tapping Attaching Screws. A Grounding Provision incorporating a tapped 1/4″-20NC hole is provided.

Anchorage

Anchorage Kit will include four (4) L-shaped Steel Anchor Bolts conforming to AASHTO M314-90 Grade 55. Ten inches (10″) of Threaded End will be Galvanized per ASTM A153. Kits will contain four (4) Hex Nuts, four (4) Lock Washers, and four (4) Flat Washers (all components Galvanized Steel). A bolt circle template will be provided.

 

Base and Anchorage Details
Read More >

Vibration Damper

When determined necessary by Hapco, a Vibration Damper will be factory-installed inside the pole shaft. Customer specification of the damper is available.

Vibration Dampers
Read More >

Mounting Designation

Side Drill Mount

For Side Drill Mount applications specify luminaire type, quantity and orientation. A luminaire drilling template must be supplied at time of order.

Tenon Mount – Welded or Spun

For Tenon Mount applications specify both Tenon diameter (2.375″, 2.875″, 3.5″, etc.) and length (3″, 4″, etc.). Tenon style is factory option. Welded Tenon can be specified.

Satin Aluminum Finish

Pole surface will contain a uniform Brushed Aluminum natural finish. Finish to be achieved utilizing specially formulated abrasives in a multi-pass, rotary sanding operation.

Powder Coat Finish

Coating material will be a thermosetting polyester AAMA 2604 Super Durable powder electrostatically applied, oven cured and bonded in a closed loop, automated system. Minimum thickness of finish will be two (2) mils. Hapco’s Powder Coat Finish Warranty on aluminum poles is five (5) years.

Finish Options
Read More >

Pole Shaft Warranty

Hapco warrants its aluminum pole assemblies for their lifetime to be free of defects in material and workmanship.

Hapco Lifetime Pole Assembly Warranty
Read More >

Specification Drawings – RTA No Arm Hinged Base

Click on the Product No. to download interactive PDF specification drawing.

Pole HeightProduct No.Butt DiaWall ThicknessOld Product No.
10′RTA10B5AE-**5″0.125″87907-0310X
6′RTA06B4AH-**4″0.125″73142-001
8′RTA08B4AH-**4″0.125″73142-002
RTA08C4AH-**4″0.156″
RTA08D4AH-**4″0.188″
10′RTA10B4AH-**4″0.125″73142-003
RTA10C4AH-**4″0.156″
RTA10D4AH-**4″0.188″
RTA10B5AH-**5″0.125″73142-011
RTA10C5AH-**5″0.156″
12′RTA12B4AH-**4″0.125″73142-004
RTA12C4AH-**4″0.156″
RTA12D4AH-**4″0.188″
RTA12B5AH-**5″0.125″73142-008
RTA12C5AH-**5″0.156″
14′RTA14B4AH-**4″0.125″73142-005
RTA14C4AH-**4″0.156″
RTA14D4AH-**4″0.188″
RTA14B5AH-**5″0.125″73142-009
RTA14C5AH-**5″0.156″
16′RTA16C4AH-**4″0.156″
RTA16D4AH-**4″0.188″
RTA16B5AH-**5″0.125″73142-010
RTA16C5AH-**5″0.156″
18′RTA18B5AH-**5″0.125″73142-006
RTA18C5AH-**5″0.156″
20′RTA20B5AH-**5″0.125″73142-007
RTA20C5AH-**5″0.156″