beehive base with cover off

Beehive Base

Click image to enlarge.
To download a printable file, click PDF Download >

Details

RSA No Arm Beehive Base Pole Specifications

Pole

The pole shaft will be constructed of seamless extruded tube of 6063 Aluminum Alloy per the requirements of ASTM B221. The shaft assembly shall be full-length heat treated after base weld to produce a T6 temper.

Base Style

Beehive Cast Aluminum Transformer Base of Alloy 356-T6 with Aluminum Door and Stainless Steel Attaching Screw.

Handhole

4″-5″ Butt Diameters – Contoured 7-1/2″ W x 7-1/4″ H Door Opening with Flush Mount Aluminum Door (Alloy 43F) and Stainless Steel Hex Head Screw. A Grounding Provision incorporating a 3/8″ diameter hole is provided.
 
Beehive base with cover on

Anchorage

Anchorage Kit will include three (3) L-shaped Steel Anchor Bolts conforming to AASHTO M314-90 Grade 55. Ten inches (10″) of Threaded End will be Galvanized per ASTM A153. Kits will contain three (3) Hex Nuts, three (3) Lock Washers, and three (3) Flat Washers (all components Galvanized Steel). A bolt circle template will be provided.

Base and Anchorage Details

Read More >

Beehive base anchorage cross-section

Vibration Damper

When determined necessary by Hapco, a Vibration Damper will be factory-installed inside the pole shaft. Customer specification of the damper is available.

Vibration Dampers
Read More >

Mounting Designation

Side Drill Mount

For Side Drill Mount applications specify luminaire type, quantity and orientation. A luminaire drilling template must be supplied at time of order.

Tenon Mount – Welded

For Tenon Mount applications specify both Tenon diameter (2.375″, 2.875″, 3.5″, etc.) and length (3″, 4″, etc.).
round aluminum welded tenon top

Satin Aluminum Finish

Pole surface will contain a uniform Brushed Aluminum natural finish. Finish to be achieved utilizing specially formulated abrasives in a multi-pass, rotary sanding operation.

Powder Coat Finish

Coating material will be a thermosetting polyester AAMA 2604 Super Durable powder electrostatically applied, oven cured and bonded in a closed loop, automated system. Minimum thickness of finish will be two (2) mils. Hapco’s Powder Coat Finish Warranty on aluminum poles is five (5) years.

Finish Options
Read More >

Pole Shaft Warranty

Hapco warrants its aluminum pole assemblies for their lifetime to be free of defects in material and workmanship.

Hapco Lifetime Pole Assembly Warranty
Read More >

Specification Drawings – RSA No Arm Beehive Base

Click on the Product No. to download interactive PDF specification drawing.

Pole HeightProduct No.Butt DiaWall ThicknessOld Product No.
6′RSA06B4-V-**4″0.125”77S-001
8′RSA08B4-V-**4″0.125”77S-002
10′RSA10B4-V-**4″0.125”77S-003
RSA10B5-V-**5″0.125”77S-017
12′RSA12B4-V-**4″0.125”77S-004
RSA12B5-V-**5″0.125”77S-011
14′RSA14B4-V-**4″0.125”77S-005
RSA14B5-V-**5″0.125”77S-012
RSA14D5-V-**5″0.188”77S-012
16′RSA16B5-V-**5″0.125”77S-013
RSA16D5-V-**5″0.188”77S-013
18′RSA18B5-V-**5″0.125”77S-007
20′RSA20B5-V-**5″0.125”77S-008
RSA20D5-V-**5″0.188”77S-034