Aluminum round 3-bolt anchor base

3-Bolt Base

RSA 3-bolt catalog page pdf

Click image to enlarge.
To download a printable file, click PDF Download >

Details

Florida Building Code (FBC) Catalog Pages (Wind Speeds To 180 mph)

FBC RSA 3-Bolt

Catalog Pages with 2017 FBC Wind Speed Map
PDF Download >

RSA No Arm 3-Bolt Pole Specifications

Pole

The pole shaft will be constructed of seamless extruded tube of 6063 Aluminum Alloy per the requirements of ASTM B221. The shaft assembly shall be full-length heat treated after base weld to produce a T6 temper.

Base Style

3-Bolt Cast Aluminum Base Flange of Alloy 356-T6 with Spun Aluminum Base Cover and Stainless Steel Hex Head Attaching Screw.

Handhole

4″-5″ Butt Diameters – 2″ x 4″ Handhole with curved Lap Style Aluminum Door and two (2) Stainless Steel Self-Tapping Attaching Screws. A Grounding Provision incorporating a tapped 1/4″-20NC hole is provided opposite the Handhole.

Anchorage

Anchorage Kit will include three (3) L-shaped Steel Anchor Bolts conforming to AASHTO M314-90 Grade 55. Ten inches (10″) of Threaded End will be Galvanized per ASTM A153. Kits will contain three (3) Hex Nuts, three (3) Lock Washers, and three (3) Flat Washers (all components Galvanized Steel). A bolt circle template will be provided.

Base and Anchorage Details

Read More >

Vibration Damper

When determined necessary by Hapco, a Vibration Damper will be factory-installed inside the pole shaft. Customer specification of the damper is available.

Vibration Dampers
Read More >

Mounting Designation

Side Drill Mount

For Side Drill Mount applications specify luminaire type, quantity and orientation. A luminaire drilling template must be supplied at time of order.

Tenon Mount – Welded or Spun

For Tenon Mount applications specify both Tenon diameter (2.375″, 2.875″, 3.5″, etc.) and length (3″, 4″, etc.).
round aluminum welded tenon top

Satin Aluminum Finish

Pole surface will contain a uniform Brushed Aluminum natural finish. Finish to be achieved utilizing specially formulated abrasives in a multi-pass, rotary sanding operation.

Powder Coat Finish

Coating material will be a thermosetting polyester AAMA 2604 Super Durable powder electrostatically applied, oven cured and bonded in a closed loop, automated system. Minimum thickness of finish will be two (2) mils. Hapco’s Powder Coat Finish Warranty on aluminum poles is five (5) years.

Finish Options
Read More >

Pole Shaft Warranty

Hapco warrants its aluminum pole assemblies for their lifetime to be free of defects in material and workmanship.

Hapco Lifetime Pole Assembly Warranty
Read More >

Specification Drawings – RSA No Arm 3-Bolt Base

Click on the Product No. to download interactive PDF specification drawing.

Pole HeightProduct No.Butt DiaWall ThicknessOld Product No.
6′RSA06B4-3-**4″0.125”76S-001
8′RSA08B4-3-**4″0.125”76S-002
10′RSA10B4-3-**4″0.125”76S-003
RSA10B5-3-**5″0.125”76S-017
12′RSA12B4-3-**4″0.125”76S-004
RSA12B5-3-**5″0.125”76S-009
RSA12C5-3-**5″0.156”
RSA12D5-3-**5″0.188”
14′RSA14B4-3-**4″0.125”76S-005
RSA14B5-3-**5″0.125”76S-010
RSA14C5-3-**5″0.156”
RSA14D5-3-**5″0.188”
16′RSA16B4-3-**4″0.125”76S-006
RSA16B5-3-**5″0.125”76S-011
RSA16C5-3-**5″0.156”76S-029
RSA16D5-3-**5″0.188”76S-030
18′RSA18B5-3-**5″0.125”76S-007
RSA18C5-3-**5″0.156”76S-031
RSA18D5-3-**5″0.188”76S-032
20′RSA20B5-3-**5″0.125”76S-008
RSA20C5-3-**5″0.156”76S-033
RSA20D5-3-**5″0.188”76S-034