aluminum direct buried triple 120 cross arm

Direct Buried

direct buried triple 120 cross arm catalog page

Click image to enlarge.
To download a printable file, click PDF Download >

Details

Pole

The pole shaft will be constructed of seamless extruded tube of 6063 Aluminum Alloy per the requirements of ASTM B221. The shaft assembly shall be full-length heat treated after base weld to produce a T6 temper.

Embed Detail

Direct Buried Pole bottom section on 6″+ butt diameter poles will be partially flattened into an anti-rotational, oval cross section. Wire access will be provided 24″ below ground line. Soil conditions vary by site. Foundation requirements should be determined by a qualified Structural Engineer with knowledge of jobsite soil conditions.

direct buried in ground profile

Handhole

6″ Butt Diameter – Reinforced, 3″ x 5″ curved Cast Aluminum Frame (Alloy 356-T6) with Aluminum Door and two (2) SS Hex Head Screws. A Grounding Provision incorporating a 3/8″ diameter hole is provided opposite the Handhole.

7″+ Butt Diameters – Reinforced, 4″ x 6″ curved Cast Aluminum Frame (Alloy 356-T6) with Aluminum Door and two (2) SS Hex Head Screws. Reinforced Frame will contain a tapped 3/8″-16NC Grounding Provision.

Vibration Damper

When determined necessary by Hapco, a Vibration Damper will be factory-installed inside the pole shaft. Customer specification of the damper is available.

Vibration Dampers
Read More >

Satin Aluminum Finish

Pole surface will contain a uniform Brushed Aluminum natural finish. Finish to be achieved utilizing specially formulated abrasives in a multi-pass, rotary sanding operation.

Powder Coat Finish

Coating material will be a thermosetting polyester AAMA 2604 Super Durable powder electrostatically applied, oven cured and bonded in a closed loop, automated system. Minimum thickness of finish will be two (2) mils. Hapco’s Powder Coat Finish Warranty on aluminum poles is five (5) years.

Finish Options
Read More >

Pole Shaft Warranty

Hapco warrants its aluminum pole assemblies for their lifetime to be free of defects in material and workmanship.

Hapco Lifetime Pole Assembly Warranty
Read More >

Specification Drawings – RTA Triple Cross 120 Arm Direct Buried

Click on the Product No. to download interactive PDF specification drawing.

Pole HeightProduct No.Butt DiaWall
20′RTA20C6BEFC0-**6″0.156”
RTA20D6BEFC0-**6″0.188”
RTA20C7BEFC0-**7″0.156”
RTA20D7BEFC0-**7″0.188”
RTA20D8BEFC0-**8″0.188”
25′RTA25D6BEFC0-**6″0.188”
RTA25C7BEFC0-**7″0.156”
RTA25D7BEFC0-**7″0.188”
RTA25C8BEFC0-**8″0.156”
RTA25D8BEFC0-**8″0.188”
RTA25E8BEFC0-**8″0.219”
RTA25F8BEFC0-**8″0.250”
30′RTA30D7BEFC0-**7″0.188”
RTA30C8BEFC0-**8″0.156”
RTA30D8BEFC0-**8″0.188”
RTA30E8BEFC0-**8″0.219”
RTA30F8BEFC0-**8″0.250”
RTA30D1CEFC0-**10″0.188”
RTA30E1CEFC0-**10″0.219”
RTA30F1CEFC0-**10″0.250”
35′RTA35D8BEFC0-**8″0.188”
RTA35E8BEFC0-**8″0.219”
RTA35F8BEFC0-**8″0.250”
RTA35D1CEFC0-**10″0.188”
RTA35E1CEFC0-**10″0.219”
RTA35F1CEFC0-**10″0.250”
40′RTA40D8BEFC0-**8″0.188”
RTA40E8BEFC0-**8″0.219”
RTA40F8BEFC0-**8″0.250”
RTA40D1CEFC0-**10″0.188”
RTA40E1CEFC0-**10″0.219”
RTA40F1CEFC0-**10″0.250”
RTA40G1CEFC0-**10″0.312”