RTA Quad Cross 180 Direct Buried Round Tapered Aluminum Pole
To download a printable file, click PDF Download >
The pole shaft will be constructed of seamless extruded tube of 6063 Aluminum Alloy per the requirements of ASTM B221. The shaft assembly shall be full-length heat treated after base weld to produce a T6 temper.
6″ Butt Diameter – Reinforced, 3″ x 5″ curved Cast Aluminum Frame (Alloy 356-T6) with Aluminum Door and two (2) SS Hex Head Screws. A Grounding Provision incorporating a 3/8″ diameter hole is provided opposite the Handhole.
Direct Buried Pole bottom section on 6″+ butt diameter poles will be partially flattened into an anti-rotational, oval cross section. Wire access will be provided 24″ below ground line. Soil conditions vary by site. Foundation requirements should be determined by a qualified Structural Engineer with knowledge of jobsite soil conditions.
When determined necessary by Hapco, a Vibration Damper will be factory-installed inside the pole shaft. Customer specification of the damper is available.
Read More >
Pole surface will contain a uniform Brushed Aluminum natural finish. Finish to be achieved utilizing specially formulated abrasives in a multi-pass, rotary sanding operation.
Coating material will be a thermosetting polyester AAMA 2604 Super Durable powder electrostatically applied, oven cured and bonded in a closed loop, automated system. Minimum thickness of finish will be two (2) mils. Hapco’s Powder Coat Finish Warranty on aluminum poles is five (5) years.
Read More >
Hapco warrants its aluminum pole assemblies for their lifetime to be free of defects in material and workmanship.
Hapco Lifetime Pole Assembly Warranty
Read More >
Product No. | Pole Height | Butt Dia. | Wall ThicknessRTA20C6BEF40-** [ 20′ ] 6″ Butt Dia., 0.156” Wall
RTA20D6BEF40-** [ 20′ ] 6″ Butt Dia., 0.188” Wall
RTA20D8BEF40-** [ 20′ ] 8″ Butt Dia., 0.188” Wall
Product No. | Pole Height | Butt Dia. | Wall ThicknessRTA25D6BEF40-** [ 25′ ] 6″ Butt Dia., 0.188” Wall
Product No. | Pole Height | Butt Dia. | Wall ThicknessRTA30D7BEF40-** [ 30′ ] 7″ Butt Dia., 0.188” Wall
Product No. | Pole Height | Butt Dia. | Wall ThicknessRTA35D8BEF40-** [ 35′ ] 8″ Butt Dia., 0.188” Wall
RTA35E8BEF40-** [ 35′ ] 8″ Butt Dia., 0.219” Wall
RTA35F8BEF40-** [ 35′ ] 8″ Butt Dia., 0.250” Wall
Product No. | Pole Height | Butt Dia. | Wall ThicknessRTA40E8BEF40-** [ 40′ ] 8″ Butt Dia., 0.219” Wall
RTA40F8BEF40-** [ 40′ ] 8″ Butt Dia., 0.250” Wall
RTA40D1CEF40-** [ 40′ ] 10″ Butt Dia., 0.188” Wall
RTA40E1CEF40-** [ 40′ ] 10″ Butt Dia., 0.219” Wall
RTA40F1CEF40-** [ 40′ ] 10″ Butt Dia., 0.250” Wall
RTA40G1CEF40-** [ 40′ ] 10″ Butt Dia., 0.312” Wall