RSA No Arm Beehive Base Round Straight Aluminum Pole

no-arm-beehive-base-icon
RSA-noarm-beehive-3400x2200

Click image to enlarge.
To download a printable file, click PDF Download >

Pole
The pole shaft will be constructed of seamless extruded tube of 6063 Aluminum Alloy per the requirements of ASTM B221. The shaft assembly shall be full-length heat treated after base weld to produce a T6 temper.

Base Style
Beehive Cast Aluminum Transformer Base of Alloy 356-T6 with Aluminum Door and Stainless Steel Attaching Screw.

Handhole
4″-5″ Butt Diameters – Contoured 7-1/2″ W x 7-1/4″ H Door Opening with Flush Mount Aluminum Door (Alloy 43F) and Stainless Steel Hex Head Screw. A Grounding Provision incorporating a 3/8″ diameter hole is provided.
Beehive-Door-On-500x767
Anchorage
Anchorage Kit will include three (3) L-shaped Steel Anchor Bolts conforming to AASHTO M314-90 Grade 55. Ten inches (10″) of Threaded End will be Galvanized per ASTM A153. Kits will contain three (3) Hex Nuts, three (3) Lock Washers, and three (3) Flat Washers (all components Galvanized Steel). A bolt circle template will be provided.

Base and Anchorage Details
Read More >

ABs-Beehive-split-500-568
Vibration Damper
When determined necessary by Hapco, a Vibration Damper will be factory-installed inside the pole shaft. Customer specification of the damper is available.

Vibration Dampers
Read More >

Mounting Designation

Side Drill Mount
For Side Drill Mount applications specify luminaire type, quantity and orientation. A luminaire drilling template must be supplied at time of order.

RTA-Cap-500x500
Tenon Mount – Welded
For Tenon Mount applications specify both Tenon diameter (2.375″, 2.875″, 3.5″, etc.) and length (3″, 4″, etc.).
RSA-Tenon-500x500
Satin Aluminum Finish
Pole surface will contain a uniform Brushed Aluminum natural finish. Finish to be achieved utilizing specially formulated abrasives in a multi-pass, rotary sanding operation.

Powder Coat Finish
Coating material will be a thermosetting polyester AAMA 2604 Super Durable powder electrostatically applied, oven cured and bonded in a closed loop, automated system. Minimum thickness of finish will be two (2) mils. Hapco’s Powder Coat Finish Warranty on aluminum poles is five (5) years.

Finish Options
Read More >

Pole Shaft Warranty
Hapco warrants its aluminum pole assemblies for their lifetime to be free of defects in material and workmanship.

Hapco Lifetime Pole Assembly Warranty
Read More >

Specification Drawings - RSA No Arm Beehive Base

Download interactive PDF specification drawings of standard RSA No Arm Beehive Base Poles below.

Product No. | Pole Height | Butt Dia. | Wall Thickness | Old Product No.
RSA06B4-V-** [ 6′ ] 4″ Butt Dia., 0.125” Wall, 77S-001

RSA08B4-V-** [ 8′ ] 4″ Butt Dia., 0.125” Wall, 77S-002

RSA10B4-V-** [ 10′ ] 4″ Butt Dia., 0.125” Wall, 77S-003

RSA10B5-V-** [ 10′ ] 5″ Butt Dia., 0.125” Wall, 77S-017

Product No. | Pole Height | Butt Dia. | Wall Thickness | Old Product No.
RSA12B4-V-** [ 12′ ] 4″ Butt Dia., 0.125” Wall, 77S-004

RSA12B5-V-** [ 12′ ] 5″ Butt Dia., 0.125” Wall, 77S-011

RSA14B4-V-** [ 14′ ] 4″ Butt Dia., 0.125” Wall, 77S-005

RSA14B5-V-** [ 14′ ] 5″ Butt Dia., 0.125” Wall, 77S-012
RSA14D5-V-** [ 14′ ] 5″ Butt Dia., 0.188” Wall, 77S-012

Product No. | Pole Height | Butt Dia. | Wall Thickness | Old Product No.
RSA16B5-V-** [ 16′ ] 5″ Butt Dia., 0.125” Wall, 77S-013
RSA16D5-V-** [ 16′ ] 5″ Butt Dia., 0.188” Wall, 77S-013

RSA18B5-V-** [ 18′ ] 5″ Butt Dia., 0.125” Wall, 77S-007

RSA20B5-V-** [ 20′ ] 5″ Butt Dia., 0.125” Wall, 77S-008
RSA20D5-V-** [ 20′ ] 5″ Butt Dia., 0.188” Wall, 77S-034