4-Bolt Base

rsa no arm 4-bolt catalog sheet

Click image to enlarge.
To download a printable file, click PDF Download >

Details

FBC RSA 4-Bolt

Catalog Pages with 2017 FBC Wind Speed Map
PDF Download >

Pole

The pole shaft will be constructed of seamless extruded tube of 6063 Aluminum Alloy per the requirements of ASTM B221. The shaft assembly shall be full-length heat treated after base weld to produce a T6 temper.

Base Style

4-Bolt Cast Aluminum Base Flange of Alloy 356-T6 with Aluminum Bolt Covers (Alloy 356-F) and Stainless Steel Hex Head Attaching Screws.

Handhole

4″-5″ Butt Diameters – 2″ x 4″ Handhole with curved Lap Style Aluminum Door and two (2) SS Self-Tapping Attaching Screws. A Grounding Provision incorporating a tapped 1/4″-20NC hole is provided.

6″ Butt Diameter – Reinforced, 3″ x 5″ curved Cast Aluminum Frame (Alloy 356-T6) with Aluminum Door and two (2) SS Hex Head Screws. A Grounding Provision incorporating a 3/8″ diameter hole is provided opposite the Handhole.

7″+ Butt Diameters – Reinforced, 4″ x 6″ curved Cast Aluminum Frame (Alloy 356-T6) with Aluminum Door and two (2) SS Hex Head Screws. Reinforced Frame will contain a tapped 3/8″-16NC Grounding Provision.

Anchorage

Anchorage Kit will include four (4) L-shaped Steel Anchor Bolts conforming to AASHTO M314-90 Grade 55. Ten inches (10″) of threaded end will be galvanized per ASTM A153. Kits will contain four (4) Hex Nuts, four (4) Lock Washers, and four (4) Flat Washers (all components Galvanized Steel). A bolt circle template will be provided.

Base and Anchorage Details


Read More >

Vibration Damper

When determined necessary by Hapco, a Vibration Damper will be factory-installed inside the pole shaft. Customer specification of the damper is available.

Vibration Dampers
Read More >

Mounting Designation

Side Drill Mount

For Side Drill Mount applications specify luminaire type, quantity and orientation. A luminaire drilling template must be supplied at time of order.

Tenon Mount – Welded

For Tenon Mount applications specify both Tenon diameter (2.375″, 2.875″, 3.5″, etc.) and length (3″, 4″, etc.).

round aluminum welded tenon top

Satin Aluminum Finish

Pole surface will contain a uniform Brushed Aluminum natural finish. Finish to be achieved utilizing specially formulated abrasives in a multi-pass, rotary sanding operation.

Powder Coat Finish

Coating material will be a thermosetting polyester AAMA 2604 Super Durable powder electrostatically applied, oven cured and bonded in a closed loop, automated system. Minimum thickness of finish will be two (2) mils. Hapco’s Powder Coat Finish Warranty on aluminum poles is five (5) years.

Finish Options
Read More >

Pole Shaft Warranty

Hapco warrants its aluminum pole assemblies for their lifetime to be free of defects in material and workmanship.

Hapco Lifetime Pole Assembly Warranty
Read More >

Specification Drawings – RSA No Arm 4-Bolt Base

Click on the Product No. to download interactive PDF specification drawing.

Pole HeightProduct No.Butt DiaWall ThicknessOld Product No.
8′RSA08B4-4-**4″0.125”78S-002
10′RSA10B4-4-**4″0.125”78S-003
RSA10B5-4-**5″0.125”78S-012
12′RSA12B4-4-**4″0.125”78S-004
RSA12B5-4-**5″0.125”78S-009
RSA12C5-4-**5″0.156”
RSA12D5-4-**5″0.188”
14′RSA14B4-4-**4″0.125”78S-005
RSA14B5-4-**5″0.125”78S-010
RSA14C5-4-**5″0.156”
RSA14D5-4-**5″0.188”
16′RSA16B4-4-**4″0.125”78S-006
RSA16B5-4-**5″0.125”78S-011
RSA16C5-4-**5″0.156”78S-029
RSA16D5-4-**5″0.188”78S-030
RSA16C6-4-**6″0.156”
RSA16D6-4-**6″0.188”
18′RSA18B5-4-**5″0.125”78S-007
RSA18C5-4-**5″0.156”78S-031
RSA18D5-4-**5″0.188”78S-032
RSA18D6-4-**6″0.188”
20′RSA20B5-4-**5″0.125”78-008
RSA20C5-4-**5″0.156”78-033
RSA20D5-4-**5″0.188”78-034
RSA20B6-4-**6″0.125”55-001
RSA20C6-4-**6″0.156”55-002
RSA20D6-4-**6″0.188”55-003
RSA20C7-4-**7″0.156”55-004
RSA20D7-4-**7″0.188”55-005
RSA20C8-4-**8″0.156”55-006
RSA20D8-4-**8″0.188”55-007
25′RSA25C6-4-**6″0.156”55-062
RSA25D6-4-**6″0.188”55-063
RSA25C7-4-**7″0.156”55-064
RSA25D7-4-**7″0.188”55-065
RSA25C8-4-**8″0.156”55-066
RSA25D8-4-**8″0.188”55-067
RSA25E8-4-**8″0.219”55-068
RSA25F8-4-**8″0.250”55-069
30′RSA30D6-4-**6″0.188”55-123
RSA30C7-4-**7″0.156”55-124
RSA30D7-4-**7″0.188”55-125
RSA30C8-4-**8″0.156”55-126
RSA30D8-4-**8″0.188”55-127
RSA30E8-4-**8″0.219”55-128
RSA30F8-4-**8″0.250”55-129
RSA30D9-4-**9″0.188”55-131
RSA30F9-4-**9″0.250”55-133
RSA30D1-4-**10″0.188”55-139
35′RSA35C8-4-**8″0.156”55-186
RSA35D8-4-**8″0.188”55-187
RSA35E8-4-**8″0.219”55-188
RSA35F8-4-**8″0.250”55-189
RSA35D9-4-**9″0.188”55-191
RSA35F9-4-**9″0.250”55-193
RSA35D1-4-**10″0.188”55-199
RSA35E1-4-**10″0.219”55-200
RSA35F1-4-**10″0.250”55-201
RSA35G1-4-**10″0.312”55-202
40′RSA40D8-4-**8″0.188”55-247
RSA40E8-4-**8″0.219”55-248
RSA40F8-4-**8″0.250”55-249
RSA40D9-4-**9″0.188”55-251
RSA40F9-4-**9″0.250”55-253
RSA40D1-4-**10″0.188”55-259
RSA40E1-4-**10″0.219”55-260
RSA40F1-4-**10″0.250”55-261
RSA40G1-4-**10″0.312”55-262